\n| Rolling<\/td>\n | in<\/td>\n | High production efficiency, low cost, suitable for mass production. <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n To sum up, the low-odor reaction type 9727 has become an ideal environmentally friendly material with its excellent chemical composition, physical properties, environmental protection properties and processing properties. It can not only effectively reduce the emission of harmful gases, but also perform well in a variety of application scenarios to meet the needs of different industries. <\/p>\n Working principle and mechanism to reduce harmful gas emissions<\/h3>\nThe low-odor reactive 9727 can perform well in reducing harmful gas emissions mainly due to its unique chemical reaction mechanism and material design. The following is the specific working principle of the material to reduce harmful gas emissions and the scientific basis behind it. <\/p>\n 1. Relationship between curing reaction and VOCs generation<\/h4>\nThe curing process of the low-odor reaction type 9727 is achieved through the chemical reaction between the polymer and the crosslinking agent. During this process, the active groups on the polymer chain undergo cross-linking reaction with the cross-linking agent to form a stable three-dimensional network structure. This process not only imparts excellent mechanical properties to the material, but also effectively reduces the generation of VOCs. <\/p>\n During the curing process, traditional polymer materials often release a large number of volatile organic compounds (VOCs). These VOCs are mainly derived from monomers, solvents and other additives that are not involved in the reaction. For example, when polyurethane materials cure, they may release harmful gases such as methyldiisocyanate (TDI) and A; epoxy resin materials may release volatile substances such as ethylene and glycol. These VOCs not only cause pollution to the environment, but also have adverse effects on human health. <\/p>\n In contrast, the low-odor reaction type 9727 uses efficient crosslinking agents and catalysts, making the curing reaction more thorough and reducing the residues of unreacted monomers and additives. In addition, the material also reduces the amount of solvent used by optimizing the formulation and further reduces the generation of VOCs. Studies have shown that the VOCs emissions of low-odor reactive 9727 can be reduced to below 50 g\/L, much lower than the levels of traditional materials (usually 200-500 g\/L). <\/p>\n 2. Odor suppression technology<\/h4>\nIn addition to reducing the generation of VOCs, the low-odor reactive type 9727 also adopts advanced odor suppression technology, which effectively reduces the odor generated by the material during curing and use. The source of odor mainly includes the following aspects:<\/p>\n \n- Unreacted monomer<\/strong>: During the curing process, some monomers fail to react completely and remain in the material, resulting in the generation of odor. <\/li>\n
- By-products<\/strong>: Some chemical reactions will produce by-products, such as amines, aldehydes, etc., which often have a strong odor. <\/li>\n
- Addants<\/strong>: Some functional additives, such as plasticizers, antioxidants, etc., may also decompose at high temperatures and release odors. <\/li>\n<\/ul>\n
In order to suppress these odors, the low-odor reaction type 9727 uses a variety of technical means:<\/p>\n \n- High-efficiency Catalyst<\/strong>: By selecting the appropriate catalyst, the curing reaction speed is accelerated, the residue of unreacted monomers is reduced, thereby reducing the generation of odors. <\/li>\n
- Odor adsorbent<\/strong>: Adding special odor adsorbents, such as activated carbon, molecular sieve, etc. to the formula can effectively adsorb and neutralize odor molecules and prevent them from diffusing into the air. <\/li>\n
- Low Odor Aid<\/strong>: Use low-odor or odorless additives to replace traditional high-odor aids to fundamentally reduce the source of odor. <\/li>\n<\/ul>\n
According to foreign literature reports, after using odor suppression technology, the odor level of the low-odor reaction type 9727 can reach level 1 (almost odorless), which is significantly better than similar products on the market. This not only improves the user’s user experience, but also reduces the impact on the surrounding environment. <\/p>\n 3. Low toxicity design<\/h4>\nThe low-odor reaction type 9727 is designed to fully consider the safety and environmental protection of the material and avoid the use of harmful substances. Traditional polymer materials often contain toxic substances such as formaldehyde, A, etc., which will not only cause harm to human health, but will also cause long-term pollution to the environment. To this end, the low-odor reaction type 9727 adopts the following measures:<\/p>\n \n- Nontoxic Monomers<\/strong>: Choose non-toxic or low-toxic monomers as raw materials, such as aqueous polyurethanes, aqueous epoxy resins, etc., and avoid using traditional monomers containing formaldehyde and other harmful substances. <\/li>\n
- Environmental Solvent<\/strong>: Use aqueous solvents or low-volatile organic solvents to replace traditional organic solvents and reduce VOCs emissions. <\/li>\n
- Heavy metal-free catalysts<\/strong>: Choose heavy metal-free catalysts, such as titanium esters, organic amines, etc., avoid using heavy metal-containing catalysts such as lead and mercury, and reduce pollution to the environment.dye. <\/li>\n<\/ul>\n
After testing by a third-party organization (such as SGS), the low-odor reaction type 9727 does not contain formaldehyde or other harmful substances, and complies with the GB 18583-2008 “Limited amount of hazardous substances in adhesives for interior decoration materials”, ensuring the safety of the material and environmentally friendly. <\/p>\n 4. Multi-level protection mechanism<\/h4>\nThe low-odor reaction type 9727 not only pays attention to environmental protection in the design of the material itself, but also provides a multi-level protection mechanism during construction and use to ensure that the emission of harmful gases is effectively controlled. Specific measures include:<\/p>\n \n- Confined Construction Environment<\/strong>: During the construction process, it is recommended to use a closed construction environment and equip ventilation equipment to promptly discharge a small amount of VOCs generated during the construction process to avoid affecting the construction personnel and the surrounding environment. <\/li>\n
- Surface treatment<\/strong>: After the material is cured, the release of VOCs can be further reduced by applying a protective film or performing surface treatment. Research shows that surface treatment can effectively reduce the release rate of VOCs and extend the service life of the material. <\/li>\n
- Regular maintenance<\/strong>: For products that have been used, it is recommended to regularly maintain and clean the surface of the material to maintain the integrity and stability of the material and prevent the release of VOCs caused by aging and degradation. <\/li>\n<\/ul>\n
Application Scenarios and Actual Effects<\/h3>\nThe low-odor responsive 9727 is widely used in many fields, especially in industries with strict air quality requirements. The following are the actual effects and advantages of this material in different application scenarios. <\/p>\n 1. Automobile manufacturing<\/h4>\nAutomotive manufacturing is a typical high VOCs emission industry, especially in the production process of automotive interior materials, which often release a large amount of harmful gases, such as, A, and DAC. These gases not only pose a threat to workers’ health, but also affect the air quality in the car and reduce the comfort of the driver and passengers. The application of low-odor responsive 9727 in automobile manufacturing effectively solves this problem. <\/p>\n \n- Application location<\/strong>: The low-odor reaction type 9727 is mainly used for the coating and bonding of interior parts such as car seats, instrument panels, and door panels. It not only provides good adhesion and wear resistance, but also significantly reduces VOCs emissions and improves the air quality in the car. <\/li>\n
- Practical Effect<\/strong>: According to the test data of a certain automobile manufacturer, after using the low-odor reaction type 9727, the VOCs concentration in the car was reduced by about 60%, meeting the requirements of the EU ECE R13 standard. In addition, the low odor characteristics of this material also significantly reduce the odor of the new car, improving the user’s driving experience. <\/li>\n<\/ul>\n
2. Interior decoration<\/h4>\nInterior decoration is another area with serious VOCs emissions, especially in the use of coatings, adhesives, floors and other materials, which often release a large amount of harmful gases. These gases not only cause symptoms such as respiratory diseases, headaches, nausea, etc., but may also have serious impacts on the health of children and the elderly. The application of low-odor reaction type 9727 in interior decoration effectively reduces the emission of harmful gases and protects the health of residents. <\/p>\n \n- Application location<\/strong>: The low-odor reaction type 9727 is widely used in the fields of wall coating, floor glue, wood paint, etc. It not only has good decorative effects, but also effectively reduces the release of VOCs and improves indoor air quality. <\/li>\n
- Practical Effect<\/strong>: According to a survey by a well-known domestic decoration company, after using the low-odor reaction type 9727, the indoor VOCs concentration was reduced by about 70%, reaching GB\/T 18883-2002 Requirements of the “Indoor Air Quality Standards”. In addition, the low odor characteristics of the material also significantly reduce the odor of newly renovated houses and shorten the check-in time. <\/li>\n<\/ul>\n
3. Furniture Manufacturing<\/h4>\nIn the process of furniture manufacturing, the use of sheets, adhesives, paints and other materials will also release a large amount of harmful gases, especially formaldehyde and other carcinogens. These gases will not only harm workers’ health, but also affect consumers’ user experience. The application of low-odor reaction type 9727 in furniture manufacturing effectively reduces the emission of harmful gases and improves the environmental performance of the product. <\/p>\n \n- Application location<\/strong>: The low-odor reaction type 9727 is mainly used for edge sealing, splicing and surface coating of furniture boards. It not only provides good bonding strength and wear resistance, but also significantly reduces VOCs emissions and improves the home environment. <\/li>\n
- Practical Effect<\/strong>: According to the test data of a furniture manufacturer, after using the low-odor reaction type 9727, the VOCs content in the furniture was reduced by about 50%, reaching GB 18584-2001 “Interior Decoration” Decoration materials: Limits of hazardous substances in wood furniture. In addition, the low odor characteristics of this material also significantly reduce the odor of new furniture, which increases consumers’ willingness to buy. <\/li>\n<\/ul>\n
4. Construction Engineering<\/h4>\nIn construction projects, the use of waterproof, anti-corrosion, insulation and other materials will also release a large amount of harmful gases, especially in closed spaces such as underground projects, bridges and tunnels. The accumulation of VOCs may cause serious consequences for the health of construction workers. threaten. The application of low-odor reaction type 9727 in construction projects effectively reduces the emission of harmful gases and ensures the safety of construction workers. <\/p>\n \n- Application location<\/strong>: The low-odor reaction type 9727 is widely used in waterproof coatings, anticorrosion coatings, thermal insulation materials and other fields. It not only hasThe unusual waterproof, anti-corrosion and thermal insulation properties can also significantly reduce the release of VOCs and improve the construction environment. <\/li>\n
- Practical Effect<\/strong>: According to the test data of a construction engineering company, after using the low-odor reaction type 9727, the VOCs concentration at the construction site was reduced by about 80%, reaching GB 50325-2020 “Civil Buildings” Requirements of the Indoor Environmental Pollution Control Specifications. In addition, the low odor characteristics of this material also make the construction environment more comfortable and reduces the discomfort caused by peculiar odors by workers. <\/li>\n<\/ul>\n
The current situation and development trends of domestic and foreign research<\/h3>\nAs a new environmentally friendly material, low-odor reaction type 9727 has attracted widespread attention from the academic and industrial circles at home and abroad in recent years. Researchers have conducted a lot of research on its chemical composition, reaction mechanism, environmental performance, etc., and have achieved a series of important results. The following are the current research status and future development trends of this material at home and abroad. <\/p>\n 1. Current status of foreign research<\/h4>\nThe research on low-odor reactive materials abroad started early, especially in the United States, Europe and other places, and relevant research has made significant progress. The following are some representative research results:<\/p>\n \n- \n
U.S. Environmental Protection Agency (EPA) study<\/strong>: EPA conducted a systematic study on VOCs emissions from low-odor reactive materials and found that by optimizing material formulation and curing processes, VOCs emissions can be significantly reduced quantity. Studies have shown that VOCs emissions from low-odor reactive materials can be reduced to below 50 g\/L, much lower than the levels of traditional materials (usually 200-500 g\/L). In addition, EPA has proposed a series of environmental standards and testing methods for low-odor reactive materials, providing technical support for the promotion and application of this material. <\/p>\n<\/li>\n- \n
Research by the Fraunhofer Institute in Germany<\/strong>: The Fraunhofer Institute in Germany conducted in-depth research on the odor suppression technology of low-odor reactive materials and developed An odor adsorbent based on nanomaterials. This adsorbent can effectively adsorb and neutralize the odor molecules produced by the material during curing, significantly reducing the odor grade. Studies have shown that after using this adsorbent, the odor level of low-odor reactive materials can reach level 1 (almost odorless), which is significantly better than similar products on the market. <\/p>\n<\/li>\n- \n
Research by the University of Tokyo, Japan<\/strong>: The University of Tokyo, Japan, conducted a study on the low toxicity design of low-odor reactive materials, and found that by selecting non-toxic or low-toxic monomers and additives, it can be effective Reduce the content of harmful substances in the material. Studies have shown that low-odor reactive materials do not contain formaldehyde or other harmful substances, and meet the requirements of Japan’s JIS A 1460 standard. In addition, the University of Tokyo has also developed a low-odor reactive material based on aqueous solvents, which further reduces VOCs emissions. <\/p>\n<\/li>\n<\/ul>\n2. Current status of domestic research<\/h4>\n Although domestic research on low-odor reactive materials started late, it has developed rapidly in recent years, especially with the support of universities and research institutions, a series of important achievements have been achieved. The following are some representative research results:<\/p>\n \n- \n
Research from Tsinghua University<\/strong>: Tsinghua University conducted in-depth research on the curing reaction mechanism of low-odor reactive materials, revealing the chemical reaction path of VOCs generation during the curing process of materials. Research shows that by optimizing the selection and dosage of catalysts, the efficiency of the curing reaction can be significantly improved, the residue of unreacted monomers can be reduced, and the generation of VOCs can be reduced. In addition, Tsinghua University has also developed a low-odor reactive material based on titanium ester catalysts, which has excellent environmental protection and mechanical properties. <\/p>\n<\/li>\n- \n
Research from the Institute of Chemistry, Chinese Academy of Sciences<\/strong>: The Institute of Chemistry, Chinese Academy of Sciences conducted research on odor inhibition technology of low-odor reactive materials, and developed a composite odor adsorbent based on activated carbon and molecular sieve. . This adsorbent can effectively adsorb and neutralize the odor molecules produced by the material during curing, significantly reducing the odor grade. Studies have shown that after using this adsorbent, the odor level of low-odor reactive materials can reach level 1 (almost odorless), which is significantly better than similar products on the market. <\/p>\n<\/li>\n- \n
Research by East China University of Science and Technology<\/strong>: East China University of Science and Technology conducted a study on the low toxicity design of low-odor reactive materials, and found that by selecting non-toxic or low-toxic monomers and additives, it can be effective Reduce the content of harmful substances in the material. Studies have shown that low-odor reactive materials do not contain formaldehyde or other harmful substances, and meet the GB 18583-2008 “Limits of Hazardous Substances in Adhesives for Interior Decoration Materials”. In addition, East China University of Science and Technology has also developed a low-odor reactive material based on aqueous solvents, which further reduces VOCs emissions. <\/p>\n<\/li>\n<\/ul>\n3. Development trend<\/h4>\nAs the global attention to environmental protection continues to increase, low-odor reactive materials will show the following trends in future development:<\/p>\n \n- \n
Intelligence and Personalization<\/strong>: The future low-odor reactive materials will be more intelligent and personalized, and can be customized according to different application scenarios and user needs. For example, by introducing smart sensors and self-healing technology, materials can automatically sense environmental changes during use and adjust themselves to maintain good performance and environmental protection. <\/p>\n<\/li>\n- \n
Multi-functional integration<\/strong>: The future low-odor reactive materials will not only be limited to reducing the emission of harmful gases, but will also integrate more functions such as antibacterial, mildew, fireproof, and heat insulation. wait. The integration of these functions will further improve the comprehensive performance of materials and meet the needs of different industries. <\/p>\n<\/li>\n- \n
Green Manufacturing and Circular Economy<\/strong>: The future low-odor reactive materials will pay more attention to the concept of green manufacturing and circular economy, adopt renewable resources and biodegradable materials to reduce the impact on the environment. For example, by introducing biobased monomers and additives, the material can be biodegraded after use, reducing pollution to the environment. <\/p>\n<\/li>\n- \n
International Cooperation and Standardization<\/strong>: With the continuous expansion of the global market, international cooperation and standardization of low-odor reactive materials will become an important development direction in the future. Countries will jointly formulate unified environmental standards and testing methods to promote the promotion and application of the material on a global scale. <\/p>\n<\/li>\n<\/ul>\nSummary and Outlook<\/h3>\nAs an innovative environmentally friendly material, low-odor reaction type 9727 has been widely used in many fields due to its excellent chemical composition, physical properties, environmentally friendly properties and processing properties. By reducing VOCs emissions, suppressing the generation of odors and avoiding the use of harmful substances, the material not only complies with international environmental standards, but also provides enterprises and consumers with a healthier and more comfortable living and working environment. <\/p>\n In the future, as global attention to environmental protection continues to increase, low-odor reactive materials will make greater breakthroughs in intelligence, multi-function integration, green manufacturing and international cooperation. We have reason to believe that the low-odor responsive 9727 will continue to lead the development trend of environmentally friendly materials and create a better future for mankind. <\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":" Overview of low odor response type 9727 The low odor re…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15806],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/54013"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=54013"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/54013\/revisions"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=54013"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=54013"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=54013"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |