<\/p>\n
Structural formula<\/p>\n
Methyldichlorosilane,<\/p>\n
Monomethyldichlorosilane,<\/p>\n
Dow Corning\u00ae product Z-1218,<\/p>\n
CH3SiHCl2<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
CAS number:<\/b>75-54-7<\/p>\n
MDL number:<\/b>MFCD00000494<\/p>\n
EINECS number:<\/b>200-877-1<\/p>\n
RTECS number:<\/b>VV3500000<\/p>\n
BRN number:<\/b>1071194<\/p>\n
PubChem number:<\/b>24867579<\/p>\nPhysical property data<\/h2>\n
1. Properties: colorless liquid, smokes in humid air, has a pungent odor, and is easy to deliquesce. [1]<\/sup><\/p>\n2. Melting point (\u2103): -93[2]<\/sup><\/p>\n3. Boiling point (\u2103): 41.9[3]<\/sup><\/p>\n4. Relative density (water = 1): 1.105[4]<\/sup><\/p>\n5. Relative vapor Density (air=1): 4.0[5]<\/sup><\/p>\n6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
2. Melting point (\u2103): -93[2]<\/sup><\/p>\n3. Boiling point (\u2103): 41.9[3]<\/sup><\/p>\n4. Relative density (water = 1): 1.105[4]<\/sup><\/p>\n5. Relative vapor Density (air=1): 4.0[5]<\/sup><\/p>\n6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
3. Boiling point (\u2103): 41.9[3]<\/sup><\/p>\n4. Relative density (water = 1): 1.105[4]<\/sup><\/p>\n5. Relative vapor Density (air=1): 4.0[5]<\/sup><\/p>\n6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
4. Relative density (water = 1): 1.105[4]<\/sup><\/p>\n5. Relative vapor Density (air=1): 4.0[5]<\/sup><\/p>\n6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
5. Relative vapor Density (air=1): 4.0[5]<\/sup><\/p>\n6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
6. Saturated vapor pressure (kPa): 46.78 (20\u2103)[6]<\/sup><\/p>\n7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
7. Critical pressure (MPa): 3.95[7]<\/sup><\/p>\n8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
8. Octanol\/water partition coefficient: 1.70[8]<\/sup> sup><\/p>\n9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
9. Flash point (\u2103): -32.22; -9 (CC) [9]<\/sup><\/p>\n10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
10. Ignition temperature (\u2103) \uff1a290[10]<\/sup><\/p>\n11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
11. Explosion upper limit (%): 55.0[11]<\/sup><\/p>\n12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
12. Explosion lower limit (%) %): 2.4[12]<\/sup><\/p>\n13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
13. Solubility: soluble in benzene, ether, and heptane. [13]<\/sup><\/p>\n<\/p>\nToxicological data<\/h2>\n1. Skin\/eye irritation<\/p>\nStandard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\nStandard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
1. Skin\/eye irritation<\/p>\n
Standard Draize test: rabbit, skin contact: 2mg\/24H; severity of reaction: severe. <\/p>\n
Standard Draize test: Rabbit, eye contact: 24mg\/24H; severity of reaction: moderate. <\/p>\n
2. Acute toxicity: Rat oral LD50: 2830\u03bcL\/kg; rat inhalation LC50: 300ppm\/4H. <\/p>\n
3. Acute toxicity[14]<\/sup><\/strong><\/strong><\/p>\nLD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\nLC50: 300ppm (rat inhalation, 4h)<\/p>\n4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
LD50: 2830\u03bcl (3113mg)\/kg (rat oral)<\/p>\n
LC50: 300ppm (rat inhalation, 4h)<\/p>\n
4. Irritation[15]<\/sup> <\/strong><\/strong><\/p>\nRabbit transdermal: 2mg (24h), severe stimulation. <\/p>\nRabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\nEcological data<\/h2>\n1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Rabbit transdermal: 2mg (24h), severe stimulation. <\/p>\n
Rabbit eye: 20mg (24h), moderate irritation. <\/p>\n<\/p>\n
1. Slightly harmful to water, avoid undiluted or large amounts of product coming into contact with groundwater, waterways or sewage systems. <\/p>\n
2. Ecotoxicity<\/strong> No information available<\/p>\n3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
3. Biodegradability<\/strong> No information available<\/p>\n 4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
4. Non-biodegradability<\/strong> No information available<\/p>\n<\/p>\nMolecular structure data<\/h2>\n1. Molar refractive index: not available<\/p>\n2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
1. Molar refractive index: not available<\/p>\n
2. Molar volume (cm3<\/sup>\/mol): not available<\/p>\n3. etc. Zhang specific volume (90.2K): None available<\/p>\n4. Surface tension (dyne\/cm): None available<\/p>\n5. Dielectric constant: None available<\/p>\n6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
3. etc. Zhang specific volume (90.2K): None available<\/p>\n
4. Surface tension (dyne\/cm): None available<\/p>\n
5. Dielectric constant: None available<\/p>\n
6. Polarizability (10-24<\/sup>cm3<\/sup>): None available<\/p>\n7. Single isotope mass: 113.945932 Da<\/p>\n8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n9. Average mass: 115.034 Da<\/p>\n<\/p>\nCompute chemical data<\/h2>\n1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n2. Number of hydrogen bond donors: 0<\/p>\n3. Number of hydrogen bond acceptors: 0<\/p>\n4. Number of rotatable chemical bonds: 0<\/p>\n5. Number of tautomers: none<\/p>\n6. Topological molecule polar surface area 0<\/p>\n7. Number of heavy atoms: 4<\/p>\n8. Surface charge: 0<\/p>\n9. Complexity: 13.5<\/p>\n10. Number of isotope atoms: 0<\/p>\n11. Determine the number of atomic stereocenters: 0<\/p>\n12. Uncertain number of atomic stereocenters: 0<\/p>\n13. Determine the number of chemical bond stereocenters: 0 <\/p>\n14. Number of uncertain chemical bond stereocenters: 0<\/p>\n15. Number of covalent bond units: 1<\/p>\n<\/p>\nProperties and stability<\/h2>\n1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
7. Single isotope mass: 113.945932 Da<\/p>\n
8. Standard\ufffd\ufffdMass: 114 Da<\/p>\n
9. Average mass: 115.034 Da<\/p>\n<\/p>\n
1. Reference value for hydrophobic parameter calculation (XlogP): None<\/P><\/p>\n
2. Number of hydrogen bond donors: 0<\/p>\n
3. Number of hydrogen bond acceptors: 0<\/p>\n
4. Number of rotatable chemical bonds: 0<\/p>\n
5. Number of tautomers: none<\/p>\n
6. Topological molecule polar surface area 0<\/p>\n
7. Number of heavy atoms: 4<\/p>\n
8. Surface charge: 0<\/p>\n
9. Complexity: 13.5<\/p>\n
10. Number of isotope atoms: 0<\/p>\n
11. Determine the number of atomic stereocenters: 0<\/p>\n
12. Uncertain number of atomic stereocenters: 0<\/p>\n
13. Determine the number of chemical bond stereocenters: 0 <\/p>\n
14. Number of uncertain chemical bond stereocenters: 0<\/p>\n
15. Number of covalent bond units: 1<\/p>\n<\/p>\n
1. Stability[16]<\/sup><\/strong><\/strong> Stable<\/p>\n2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
2. Incompatible substances [17]<\/sup><\/strong><\/strong> Strong oxidants, acids, water<\/p>\n3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
3. Conditions to avoid contact[18] <\/sup><\/strong><\/strong> Humid air<\/p>\n4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
4. Polymerization hazard[19]<\/sup><\/strong><\/strong> No Polymerization<\/p>\n5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
5. Decomposition products[20]<\/sup><\/strong><\/strong> Hydrogen chloride<\/p>\n<\/p>\nStorage method<\/h2>\nStorage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Storage Precautions[21]<\/sup><\/strong><\/strong> Store in a cool, dry and well-ventilated dedicated warehouse. Keep away from fire and heat sources. The storage temperature does not exceed 32\u00b0C and the relative humidity does not exceed 75%. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials. <\/p>\n<\/p>\nSynthesis method<\/h2>\n\n None\n <\/p>\nPurpose<\/h2>\n1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\n None\n <\/p>\n
1. Used to prepare hydrogenated silicone oil, also used for fabric treatment, waterproofing agent, etc. <\/p>\n
2. Used in the manufacture of silicone compounds. [22]<\/sup><\/p>\n<\/p>\n extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
extended-reading:https:\/\/www.bdmaee.net\/polyurethane-amine-catalyst-9727\/<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/dabco-bl-17-niax-a-107-jeffcat-zf-54\/<\/a><\/br>extended-reading:https:\/\/www.cyclohexylamine.net\/lupragen-n105-pc-cat-nmm-dabco-nmm\/<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/44441<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/category\/products\/page\/161<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/45028<\/a><\/br>extended-reading:https:\/\/www.newtopchem.com\/archives\/993<\/a><\/br>extended-reading:https:\/\/www.bdmaee.net\/fomrez-ul-6-butyltin-mercaptan-catalyst-momentive\/<\/a><\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"excerpt":{"rendered":"Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Structural formula Business number 01JQ Molecular formu…<\/p>\n","protected":false,"gt_translate_keys":[{"key":"rendered","format":"html"}]},"author":1,"featured_media":49500,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[15490],"gt_translate_keys":[{"key":"link","format":"url"}],"_links":{"self":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501"}],"collection":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/comments?post=49501"}],"version-history":[{"count":0,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/posts\/49501\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media\/49500"}],"wp:attachment":[{"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/media?parent=49501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/categories?post=49501"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.newtopchem.com\/wp-json\/wp\/v2\/tags?post=49501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"Dichloromethylsilane](\"http:\/\/www.newtopchem.com\/wp-content\/uploads\/2024\/06\/dd0151ecc362485e9050ca63c930ed25.gif\")
<\/p>\n<\/p>\n![https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg<\/a><\/br>extended-reading:http:\/\/www.newtopchem.com\/”><\/a><\/br>extended-reading:](\"https:\/\/www.bdmaee.net\/wp-content\/uploads\/2022\/08\/31-9.jpg\"){kind=link}