Overview:<\/h4>\nProduct Name: Dabco PT302<\/h4>\nAlias: Dabco PT302, low odor tertiary amine catalyst, low odor catalyst PT302, Dabco hard foam catalyst<\/h4>\nProduct Description: Dabco PT302<\/h4>\n<\/h4>\nProduct Physical Properties:<\/h4>\nAppearance: light yellow liquid<\/h4>\nViscosity(25\u2103,mPa.s):90<\/h4>\nDensity (25\u2103,g\/cm3): 0.99<\/h4>\nWater solubility: soluble in water<\/h4>\nFlash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n![\"\"](\"https:\/\/www.newtopchem.com\/wp-content\/uploads\/2023\/11\/17-1.jpg\")
<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
Alias: Dabco PT302, low odor tertiary amine catalyst, low odor catalyst PT302, Dabco hard foam catalyst<\/h4>\nProduct Description: Dabco PT302<\/h4>\n<\/h4>\nProduct Physical Properties:<\/h4>\nAppearance: light yellow liquid<\/h4>\nViscosity(25\u2103,mPa.s):90<\/h4>\nDensity (25\u2103,g\/cm3): 0.99<\/h4>\nWater solubility: soluble in water<\/h4>\nFlash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
<\/h4>\nProduct Physical Properties:<\/h4>\nAppearance: light yellow liquid<\/h4>\nViscosity(25\u2103,mPa.s):90<\/h4>\nDensity (25\u2103,g\/cm3): 0.99<\/h4>\nWater solubility: soluble in water<\/h4>\nFlash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
Appearance: light yellow liquid<\/h4>\nViscosity(25\u2103,mPa.s):90<\/h4>\nDensity (25\u2103,g\/cm3): 0.99<\/h4>\nWater solubility: soluble in water<\/h4>\nFlash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
Density (25\u2103,g\/cm3): 0.99<\/h4>\nWater solubility: soluble in water<\/h4>\nFlash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
Flash point (PMCC,\u2103): 98<\/h4>\nHydroxyl value (mgKOH\/g): 470<\/h4>\nCAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
CAS Dabco PT302 Main application Dabco PT302<\/h4>\nProduct Specification Dabco PT302 Brand Other<\/h4>\nExecutive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
Executive standard Dabco PT302 Active substance content(%) Dabco PT302<\/h4>\n<\/h4>\nProduct Usage:<\/h4>\nDabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;<\/h4>\nDabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;<\/h4>\nThe dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;<\/h4>\nDabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.<\/h4>\n<\/h4>\nShelf Life.<\/h4>\nKeep unopened for two years<\/h4>\n<\/h4>\nStorage and Transportation:<\/h4>\nShould be kept sealed and stored in a dry, cool and ventilated warehouse<\/h4>\n<\/h4>\nPackaging:<\/h4>\n200KG\/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10\u00b0C to 30\u00b0C. Lower or higher temperatures are inappropriate and should be avoided if possible.<\/h4>\n<\/h4>\n
<\/h4>\n