Overview:<\/h4>\nName: dimethyltin dixynodecanoate, CAS 68928-76-7, Dimethyldineodecanoatetin, Fomrez UL-28<\/h4>\nDimethyldecanoatetin is an organic compound with the chemical formula C12H44O4Sn.<\/h4>\nProduct Name: Dimethyldimethyltin dixynodecanoate 68928-76-7<\/h4>\nProduct code: DDDO<\/h4>\nChinese name: Dimethyltin dixynodecanoate<\/h4>\nForeign name Dimethylbis[(1-oxoneodecyl)oxy]stannane<\/h4>\nMolecular Formula: C12H44O4Sn<\/h4>\nCAS No.: 68928-76-7<\/h4>\nItem Indicator<\/h4>\nAppearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n![\"\"](\"https:\/\/www.newtopchem.com\/wp-content\/uploads\/2023\/11\/74-TY.jpg\")
<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Dimethyldecanoatetin is an organic compound with the chemical formula C12H44O4Sn.<\/h4>\nProduct Name: Dimethyldimethyltin dixynodecanoate 68928-76-7<\/h4>\nProduct code: DDDO<\/h4>\nChinese name: Dimethyltin dixynodecanoate<\/h4>\nForeign name Dimethylbis[(1-oxoneodecyl)oxy]stannane<\/h4>\nMolecular Formula: C12H44O4Sn<\/h4>\nCAS No.: 68928-76-7<\/h4>\nItem Indicator<\/h4>\nAppearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Product code: DDDO<\/h4>\nChinese name: Dimethyltin dixynodecanoate<\/h4>\nForeign name Dimethylbis[(1-oxoneodecyl)oxy]stannane<\/h4>\nMolecular Formula: C12H44O4Sn<\/h4>\nCAS No.: 68928-76-7<\/h4>\nItem Indicator<\/h4>\nAppearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Foreign name Dimethylbis[(1-oxoneodecyl)oxy]stannane<\/h4>\nMolecular Formula: C12H44O4Sn<\/h4>\nCAS No.: 68928-76-7<\/h4>\nItem Indicator<\/h4>\nAppearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
CAS No.: 68928-76-7<\/h4>\nItem Indicator<\/h4>\nAppearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Appearance Clarified viscous liquid<\/h4>\nColor (Pt-Co No.) \u226450<\/h4>\nRefractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Refractive index (25\u2103) 1,4630 – 1,4730<\/h4>\nDensity (25\u2103) 1,1230 – 1,1630<\/h4>\nTin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Tin content 22,50% – 24,50%<\/h4>\nMoisture < 0,40%<\/h4>\nChlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Chlorine content < 0,20<\/h4>\n<\/h4>\nEnglish name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
English name: Dimethyldineodecanoatetin<\/h4>\nCAS No.: 68928-76-7<\/h4>\nMolecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Molecular Formula: C22H44O4SN<\/h4>\n<\/h4>\nProduction method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
Production method:<\/h4>\nMade from dichlorodimethyltin and neodecanoic acid by dehydrochlorination reaction.<\/h4>\n<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
<\/h4>\nEnvironmental Impact:<\/h4>\nOSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
OSHA Environmental Safety Standard for the use of organotins in all industries [ 8H TWA (8-hour average) is 0.1 mg\/m (in tin); short-term exposure value is 0.2 mg\/m];<\/h4>\n<\/h4>\nUses:<\/h4>\nClarifying viscous liquid<\/h4>\nUsed as an efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Used as hardening catalyst for two-component polyurethane, polyester, nitrocellulose lacquer, ink and other coatings and warm-air hardening coatings with good oxidation resistance; used as a catalyst for the production of urethane plastics, urethane coatings, silicone rubber, catalysts, and other uses.<\/h4>\n<\/h4>\nStorage method:<\/h4>\nRoom temperature, avoid light, ventilated dry place, sealed storage<\/h4>\n<\/h4>\nStorage and transportation:<\/h4>\nStore in sealed containers and in a cool, dry place. The place of storage must be locked and the key must be given to the technical experts and their assistants for safekeeping. The storage place must be kept away from oxidizing agents and away from water sources.<\/h4>\nPacked in general-purpose plastic and plastic-sprayed iron drums or glass containers and transported according to general chemical management regulations.<\/h4>\n<\/h4>\nPackaging:<\/h4>\nPacking: it is preferable to use glass containers, plastic containers, chlorine corrosion-resistant metal utensils to contain, sealed and stored. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust, avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.<\/h4>\n<\/h4>\n
<\/h4>\n