With the rapid development of the fitness industry, the quality and durability of fitness equipment have become the focus of consumers and manufacturers. The surface treatment technology of fitness equipment directly affects its service life and user experience. Bis-(2-dimethylaminoethyl) ether (hereinafter referred to as “bis-ether”) is a new surface treatment material. Due to its excellent wear resistance and chemical stability, bis-(2-dimethylaminoethyl) ether (hereinafter referred to as “bis-ether”) has gradually been used in the surface treatment of fitness equipment. This article will discuss in detail the wear resistance of bis ethers in the surface treatment of fitness equipment, including its product parameters, application effects, testing methods and future development directions.
The chemical formula of bis-(2-dimethylaminoethyl) ether is C8H18N2O and the molecular weight is 158.24 g/mol. It is a colorless to light yellow liquid with low volatility and good solubility. The bisether molecule contains two dimethylaminoethyl groups, which give them excellent chemical stability and reactive activity.
| parameter name | Value/Description |
|---|---|
| Appearance | Colorless to light yellow liquid |
| Density | 0.92 g/cm3 |
| Boiling point | 220-230°C |
| Flashpoint | 95°C |
| Solution | Easy soluble in water and organic solvents |
| Viscosity | 10-15 mPa·s |
Diesethers have good chemical stability and can remain stable over a wide pH range. It is not easy to react with common acids and alkalis, but may decompose under the action of strong oxidants. The molecular structure of the bisether contains ether bonds and amino groups, which make them exhibit excellent adhesion and wear resistance during surface treatment.
The application of bis ether in surface treatment of fitness equipment mainly includes the following steps:
Di-ether coatings show the following advantages in surface treatment of fitness equipment:
The following are some examples of fitness equipment treated with biether coating:
| Equipment Type | Processing Effect | User Feedback |
|---|---|---|
| treadmill | Smooth surface and strong wear resistance | No obvious wear and tear for one year |
| Dumbbell | Even coating, comfortable feel | Good grip, not easy to slip |
| Exercise Bike | Corrosion-resistant, easy to clean | Easy to clean, long-lasting appearance |
| Strength training equipment | Strong adhesion, not easy to peel | The coating is intact after two years of use |
To evaluate the wear resistance of bis-ether coatings, the following test methods are usually used:
The following are the wear resistance test results of some bis-ether coatings:
| Test Method | Test conditions | Test results |
|---|---|---|
| Taber wear test | 500 rpm, CS-10 grinding wheel | Weight loss 0.5mg |
| Scratch Test | 1N load, diamond stroking | Scratch width 10μm |
| Friction Test | 100N load, 1000 frictions | Friction coefficient 0.15 |
| Practical use test | Treadmill, use for one year | No obvious wear |
From the test results, it can be seen that the bis-ether coating exhibits a low weight loss in the Taber wear test, indicating that it has excellent wear resistance. Scratch test results show that the bis-ether coating can effectively resist scratches and maintain surface integrity. Friction test results show that the bis-ether coating has a lower coefficient of friction and can reduce wear caused by friction. The actual use test further verified the wear resistance of the bis-ether coating, and there was no obvious wear after one year of use.
To improve the wear resistance of the bis-ether coating, it can be achieved by optimizing the formulation. For example, add nanofillers (such as nanosilicon dioxide, nanooxidationAluminum) can enhance the hardness and wear resistance of the coating. In addition, adjusting the ratio of bis ether to curing agent can improve the cross-linking density of the coating and improve wear resistance.
In terms of coating processes, a multi-layer coating technique can be used, i.e., an intermediate layer between the primer and the topcoat, to improve the overall performance of the coating. In addition, optimizing curing conditions (such as temperature, time) can promote sufficient curing of the coating and improve wear resistance.
Using advanced surface treatment technologies, such as plasma treatment and laser treatment, can improve the roughness and chemical activity of the surface of the equipment, enhance the adhesion of the bis-ether coating, and thus improve wear resistance.
With the increase in environmental awareness, the development of environmentally friendly biether coatings has become a future development trend. By using aqueous bis-ether solutions or bio-based raw materials, environmental pollution can be reduced and the requirements of green manufacturing can be met.
The future biether coatings need not only excellent wear resistance, but also other functions, such as antibacterial, anti-static, self-cleaning, etc. By adding functional fillers or modifiers, the versatility of the bis-ether coating can be achieved.
With the development of intelligent technology, intelligent biether coating has become possible. For example, by embedding sensors in the coating, the use status and wear of the equipment can be monitored in real time, providing users with intelligent maintenance suggestions.
Bis-(2-dimethylaminoethyl)ether, as a novel surface treatment material, exhibits excellent wear resistance in surface treatment of fitness equipment. The performance of the bis-ether coating can be further improved by optimizing the formulation, improving the process and adopting advanced surface treatment techniques. In the future, environmentally friendly, multi-functional and intelligent biether coatings will become the main direction of development, providing more possibilities for the surface treatment of fitness equipment.
| parameter name | Value/Description |
|---|---|
| Coating thickness | 10-20μm |
| Hardness | 3H-4H (pencil hardness) |
| Adhesion | 5B (Scribing method) |
| Abrasion resistance | 500 revolutions, weight loss of 0.5mg |
| Corrosion resistance | 500 hours of salt spray test |
| Application Fields | Specific application |
|---|---|
| Fitness Equipment | Treadmills, dumbbells, exercise bikes, etc. |
| Sports Equipment | Basketball racks, table tennis tables, etc. |
| Medical Devices | Operating table, rehabilitation equipment, etc. |
| Industrial Equipment | Conveyor belts, robotic arms, etc. |
| Test items | Testing Standards |
|---|---|
| Taber wear test | ASTM D4060 |
| Scratch Test | ISO 1518 |
| Friction Test | ASTM D1894 |
| Salt spray test | ASTM B117 |
Through the above content, we can fully understand the wear resistance of bis-(2-dimethylaminoethyl) ether in surface treatment of fitness equipment and its application prospects. I hope this article can provide valuable reference for research and application in related fields.
Extended reading:http://www.gengheonline.cn/archives/1909
Extended reading:https://www.bdmaee.net/dabco-t-120-catalyst-cas77-58-7-evonik-germany/
Extended reading:https://www.bdmaee.net/teda-catalyst-triethylene-diamine-tosoh/
Extended reading:http://www.gengheonline.cn/archives/208
Extended reading:https://www.cyclohexylamine.net/low-odor-amine-catalyst-bx405-low-odor-strong-gel-catalyst-bx405/
Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/33-4.jpg
Extended reading:http://www.gengheonline.cn/archives/582
Extended reading:https://www.bdmaee.net/cas814-94-8/
Extended reading:http://www.gengheonline.cn/archives/44583
Extended reading:https://www.cyclohexylamine.net/dibbutyltin-oxide-cas-818-08-6/